Ugh bad news for this 2017 Chevy Trax 1.4 Turbo ...Was doing just a oil coolant housing and discovered that the turbo is cracked. Common Problem. #Chevrolet #cars #Chevytrax

Doing a Detroit Lions hard hat for display.

Finishing up on the 2003 Mini Cooper.

Oil change, Air filter and Kevlar serpentine belt on a Mini Cooper .

Mini Cooper oil pan gasket, timing cover, timing tensioner, crankshaft pulley, serpentine belt tensioner, new drive belt done .... next, flush all fluids and install subframe.

Yes !....niceee glad I could help. Mini Love ❤️!

2004 Honda Element getting new clutch installed.

I hope so, that's a lot cheaper. You're quite welcome! Fingers crossed. 🤞

Yeah, it sounds like the timing..to me. Could be the timing chain tensioner, but if you buy that, you might as well get the timing kit, which that part is included. I thought maybe, a valve adjustment, but the rattle makes 🤔 me think the timing chain tensioner .

That sounds like the timing chain. If you take the oil cap off while it's running, does it get louder?

Ok, usually the timing
should be done at 100,000 miles. However, I've seen it a little over that. Ok, just whenever you get a moment.

Your fine ask away.... How many miles ?🤔 Loud ticking sounds like the Timing Chain Tensioner. Can you post a video when you get a chance?

Mini Cooper Parts arrived bouncing back & forth on this 03 Mini timing cover, drive belt , and pulley will be installed tomorrow.

Found another spot to repair on the Mini Cooper well. It's done now. It took me a few hours. Problem solved, yes, moving on. #minicooper

More parts arrive for Mini Cooper, and I am still waiting on 2 seals for timing cover.

I'm doing a deep cleaning of everything while I'm waiting for my timing cover seals to arrive. ##minicooper

03 Mini Cooper oil pan gasket installed... next will be the timing cover gasket. R50 #minicooper #automotive

03 Mini Cooper floor pan underside done. I'm happy with the results. Will be doing the oil pan gasket and timing cover while the subframe is out. #minicooper

03 Mini Cooper subframe overhaul im happy with the results. #minicooper

Mr.Damien ready for a walk. #basenji

Yeah, since it's right there, I would if the boot is busted.

Well, you will get there just buy some things here and there. I've been planning this for a minute. Some parts I had before the tariffs just never had time.

Mini Cooper, I dropped the subframe and added all new suspension parts. Sweeetttt Nice and clean . #minicooper

Wonder Woman Queen Nubia theme. #wonderwoman #rollerskates

Mini Cooper front suspension parts came in today. Rebuild of the front subframe. While I'm at it, I might as well do the oil pan gasket!! 😆 #minicooper #r50 #minicooperlovers

I will post up the process. Used the 3d to make the boxes. Rewiring to make the wires clean and professional.

Installing some custom body radar detector sensor for the Honda Element since this was not a feature when this car was manufactured. #Hondaelement #savetheelements

Finally, I got around to dropping the subframe to finish the underside to prep for epoxy... gonna do a complete overhaul on all the bushing. #minicooper #minicooperlovers

Ugh, so, there is a small delay 🙄 in putting this FJ Cruiser front suspension lower control arms in. Due to the manufacturer....Febest diameter is 2 mm and 1 mm off to fit the OEM Camber bolts. #fjcruiser #toyota

Some more work on the FJ Cruiser front suspension complete overhaul ! Just started ..Prepare to break some bolt or cut it's a little involved ! Life of a FJ Cruiser! Lol 😆 #fj #fjcruisertrd #toyotafj #fjcruiser #toyota