Paul Thompson

Party goblin!

Mostly finished with the body for this model from witchsong miniatures. It's 50% scale. Haven't really mastered non metallic metal techniques yet so messing around with dry brushed true metallics and using washes for the grime/rust effect.
#witchsongminiatures
#ascendantgreatwolf
#Vallejo
#anycubic

Another work in progress from Flesh of Gods - this one is Wyvan, Last Fang.

#anycubic
#fleshofgods

This is my first attempt at painting miniatures now that I've gotten a little better at printing them. The model is from CobraMode miniatures and I'm using Vallejo paints from the set recommended by Squidmar. The piece is still in progress 😅.
#Vallejo
#CobraMode
#Squidmar

There is actually a type of bagel that can fly, though. Its called a plane bagel!

Ope!

Cthulhu and Persephone!

#witchsongminiatures
#nsminiatures
#photonm7
#photonmono4
#anycubic

The Knight of Stature, and The Knight of Action from the Witchsong Miniatures collection are pretty cool! These were scaled down to about 45% of the original size and printed on the Photon Mono 4 using the ABS-Like Pro 2 resin. Sliced on Chitubox.

#anycubic
#witchsongminiatures
#photonmono4

This is a print from the ES Miniatures collection. It's Ithiqua, Death Walker/Wind Walker - A Wendigo inspired Great Old One!

The details and design for this print are probably one of my favorites that I've done so far!

Second batch of the day is up - scaled the model from the previous post up by 50%

This batch of Flaming Skulls came from the #FleshOfGods miniature collection. I was able to get two copies in one run using the Photon Mono 4. I was also using the #Anycubic ABS-Like Pro2 resin.

Made some some more models from #GrimdarkFuture and they came out pretty nice - Really happy with the details on these models!

This is my other resin print from tonight - one of the furies from Grimdark Future. The Screecher failed to print but that was my bad cause I accidentally dropped a piece of paper into the vat and it didn't adhere to the build plate 😅

#PhotonMono4
#InlandStandardResinPlus

Went through wash and cure workflow and seems good to go!

First resin print - Getting ready to fully process this test model from the Anycubic Photon Mono 4!

I think Tom is having a stroke - has anyone checked on him?

From the PrintedMinis community on Reddit: FDM miniatures - How I print them and my workflow Explore this post and more from the PrintedMinis community

www.reddit.com/r/PrintedMin...

For this one I used mostly defaults for the 0.2mm nozzle. Only thing I changed was the threshold angle. Default was 30 so I bumped it 36. For the rest of the minis I'm using the settings that /u/HOHansen posted on reddit. I'll get you link in a second.

Just printed this dice tower model by @wormbeard.bsky.social. I used a bambu P1S with the 0.2mm nozzle. Had to adjust the support settings to a slightly higher threshold angle of like 36 degrees to get the supports right. Really happy with the result!

#BambuP1S
#FDM

Got to meet some puppies tonight!

The 5090 is only 1k?

Congrats! I use this program called signal rgb for controlling the lights and it's really cool!

Thank you! I've been having a great time with it!

Thanks! Probably gonna go resin for minis but I'll still stick to fdm for terrain 😅

I'm starting the process of moving away from FB and IG - hopefully this will be a better community. Anyway, I recently got into 3d printing and here's some stuff I've made. This is one of the free models received from signing up with loot studios - printed on a bambu P1S with the 0.2mm hotend.