KDxGP

Some new design coming:
- olive green urban camouflage
- black/blue #puppypride
- purple certified pump puppy

I have updated my 3D printable DIY #BullMaster clone. It now comes in sizes from 3" to 4" and different thicknesses. You can find all model files to download on my Printables profile -> www.printables.com/model/150879...

I started work on publishing my PMPCTRL automatic pump setup. Still a lot of writing, making images and cleaning up software repositories to do before I can call it 'published'. You can track progress on www.kdxgp.com/pmpctrl

Feedback and input are always appreciated.

#cockpumping #ballpumping

Basically it's my 2-stage design with the difference being that the opening is one solid piece but two

Yes that would be a solution, but still doesn't solve the gasket. I want to make it as easy as possible for people to maintain it without having to order custom parts for it.

I've actually tried this, but the two halfs need to be aligned precisely which isn't always the case when you try to clamp it. Can be solved but still wouldn't tackle the drawback of screwing and custom gasket

I'm inching closer to a viable solution for my 2-stage split design. But:
1) It needs four screws+shims. Putting it on/off is fiddly.
2) The gaskets wear off and need replacement. They're easy and cheap to make, but ideally you would require tools (hole-punch) to make.
Your thoughts on that?

Progress in the 3,7" tube...
#monstercock
#pumpinghuge

How's the fit?

Oh boy, you have this tube just a bit over a week now

Why 'fuck'? Already to small again?

If you just send them the model I guess they don't even know what it is, so I don't see why it should be a problem. I hear PCBWay is ok

There are a lot of online services where you can get stuff printed. I've never tried one, but they exist

BMCC - BullMaster BMC357 Clone by KDxGP | Download free STL model | Printables.com

If you're into DIY'ing your own pumps and looking for a BullMaster BMC357, I've made a clone model for you to download at www.printables.com/model/150879... to print it yourself

I never said I would💪

As Edison has discovered lots of ways how to not make a light bulb, I'm finding new ways of how to not make a 2-stage split pump. But I'm only at 6 attempts so far.

Once it's calibrated it's easy. Problem is that you need to tune it to the volume you pump. Otherwise the system starts to become unstable because for the forces are different. So there's always adjustment needed for a new volumes for cycle/switching times of the pump, valve and sensor.

Yes, I only sell the 2-stages. The electric pump is too far from being user-friendly enough that I would sell it with a good conscience.

Ups. Seems I made a typo in the manual. 109.65mm like in the drawing is correct for the outer diameter

My new KDxGP just arrived!
Amazing quality.
4,1x11". Fucking huge!
@kdxgp.bsky.social

If you want to spot @extremgirthpump.bsky.social pumping in the woods, you'll need to look more carefully. Otherwise it will be hard to see him with his new custom camouflage pump (kdxgp.github.io?c=%2373835e&...).

#cockpumping #cockpump #penispumping #penispump #hugebulge #monstermeat

Soon...

Morning!
#pumpinghuge
@kdxgp.bsky.social

Thx!

I wanted to build an orange Halloween pump but unfortunately couldn't find the time. Would have made a good pun ... pump(kin)

"Big Blue" (kdxgp.github.io?c=%2332599c&...) next to a Monster Tube Sr.

photo generously provided by it's owner (Thank you!)

🏆 New personal best unlocked!

#cockpumping #cockpump #ballpumper #ballpumping #penispumping #penispump #pumper #pumping #pumped #vacuumpumper #vacuumpumping #monsterbulge #hugenuts #hugebulge #monstermeat

It's hard

KDxGP PMPCFG Build your Dream Pump

Depends on the size you want. Check out my configurator kdxgp.github.io and DM me than I can give you a price

After years, I finally treated myself to a new ball pump! Custom sizing, color, and designs available from @kdxgp.bsky.social!

I may have misjudged the size XD, but at least it is significantly lighter and I can't wait to get into it 😈