OpenStickCommunity

This will mean that you can change your settings as expected in real time but those changes will be lost when you unplug and plug back in. In order to save you can run the device in another mode like Xinput which will save the changes just fine.

NOTE: There is an edge case with PS4/5 mode auth and triggering flash saves (e.g. Turbo Speed, LED settings, etc.) cause the controller to not auth properly. As such, with v0.7.11 we are disabling those changes from saving to flash when you are in PS4/5 mode and have USB auth enabled.

- Added the ability to copy and paste macros via text in the advanced tab for easy sharing and backup
- Numerous web-config UI changes

- Implementation of event system
- Added the ability to specify display layout elements by GPIO pin not button via boardconfig.h
- Added the ability to map analog directions directly to digital pins

- Implemented a controller USB host option that will let you use GP2040-CE as a passthrough. Currently only supports DS4, Stadia controllers, and another GP2040-CE based device in PS4 mode.
- Added Turbo to the RGB chain
- Implemented the ability to set custom VID/PID for Xinput and USB HID

Summary of new features being added in v0.7.11:
- Implemented a Mini Menu system which allows for changes to be made via a connected OLED screen with assigned inputs
- Implemented the ability to connect case LEDs in your RGB string for new and exciting illumination possibilities

Release v0.7.11 · OpenStickCommunity/GP2040-CE This is the GP2040-CE v0.7.11 firmware release. v0.7.11 is a large release that updates a ton of backend code and bring a significant number of new features to the firmware. Summary of new features...

GP2040-CE v0.7.11 has officially been released!

v0.7.11 is a large release that updates a ton of backend code and bring a significant number of new features to the firmware.

Check it out here:
github.com/OpenStickCom...

Content Creators:
We ask that you please not stream RC builds. RC builds will change rapidly as we go through the iterations leading up to full release.

Release v0.7.11-RC1 · OpenStickCommunity/GP2040-CE What's Changed Updated input latency numbers, based on theTrains commit to site repo. by @Pelsin in #1189 Generate compile commands file used by IDE's by @DvdGiessen in #1159 Keyboard Host Clean-u...

We are happy to announce GP2040-CE v0.7.11 is now in RC1!

There is a large change log for v0.7.11 and we are excited to see what everyone thinks of it.

github.com/OpenStickCom...

Lil GP2040 install I did on the PWS stick that Punk Workshop was kind enough to gift to me. Harness all made by hand by me so that it's completely reversible should it need to be returned to stock.

My 14 year old Mad Catz TE-S lives on with new art, side panels, rear control panel and most importantly, modern console support with a GP2040-CE

Testing out some 10° tilted thumb buttons for the inner buttons

These allow you to quickly swipe your thumb inwards to press the button

Let's see how they do!

The RP2040 Quick Solder Breakout Boards are live in the hardware repo!

These are very low cost boards that let you get up and running with GP2040-CE without the need for costly assembly through a PCB maker.

Great first soldering project as well :)

github.com/OpenStickCom...

Split layout and wrist rests? You love to see the ergonomics that help players do their best. It's also got a great look and contrast to it. Happy gaming!
#FightstickFriday #GP2040CE

An awesome 3D printed fightpad from BananaFaction running #GP2040CE! There are lots of sticks and all-buttons out there, it's nice to see the gamepad get some love too.

3D Models: makerworld.com/en/models/58...
Reddit Post: www.reddit.com/r/fightstick...

#FightstickFriday

A custom Keebrawler 04-MX from a community member! Love to see what beautiful pieces people are able to make with controllers powered by #GP2040CE

Instagram: www.instagram.com/p/DAkVBNuRd79
Twitter: x.com/siegarettes/...

#FightstickFriday

Release v0.7.10 · OpenStickCommunity/GP2040-CE This is the GP2040-CE v0.7.10 firmware release. v0.7.10 is a large release that updates a ton of backend code and bring a significant number of new features to the firmware. Summary of new features...

The GP2040-CE team has released v0.7.10!

github.com/OpenStickCom...

Massive update with a ton of new features. You can check out the full changelog using the link above.
#GP2040CE #ControllerFirmware

Release v0.7.10-RC3 · OpenStickCommunity/GP2040-CE This is the GP2040-CE v0.7.10-RC3 firmware release candidate. v0.7.10-RC3 is a large release that updates a ton of backend code and bring a significant number of new features to the firmware. Summa...

v0.7.10-RC3 is live!
github.com/OpenStickCom...

- Fixed the reported issues for web config not loading profiles/invalid settings
- Additional under the hood fixes

Let us know if you see any other outstanding issues before release!
#GP2040CE #ControllerFirmware

- Fixed profile issues reported in RC1
- Some config updates and board settings were fixed. L2/R2 is now used for pin viewer & stats in web config i2c display
- Xbox One player leds now properly work on connect
- PS features fixed for PS4/PS5 player leds

Release v0.7.10-RC2 · OpenStickCommunity/GP2040-CE This is the GP2040-CE v0.7.10-RC2 firmware release candidate. v0.7.10-RC2 is a large release that updates a ton of backend code and bring a significant number of new features to the firmware. Summa...

v0.7.10-RC2 is live!
github.com/OpenStickCom...

Please leave feedback including detailed steps to replicate any issues you find. Thank you!!

#GP2040CE #ControllerFirmware

Release v0.7.10-RC1 · OpenStickCommunity/GP2040-CE This is the GP2040-CE v0.7.10-RC1 firmware release candidate. v0.7.10-RC1 Is a large release that updates a ton of backend code and bring a significant number of new features to the firmware. Summa...

Happy to announce that GP2040-CE v0.7.10-RC1 is now live!
github.com/OpenStickCom...
This is the GP2040-CE v0.7.10 firmware release candidate which updates a ton of back-end code and brings a significant number of new features to the firmware. Link for full notes.
#GP2040CE #ControllerFirmware