Zingo Andersen

Wow, I just heard of it last week and thougt it was new and maybe the reason to push me to get a VR setup like Meta Quest 3s (or other VR) on Linux, now I want it even more :)

I'm not a gamer, but play one maybe each 1-3 years :)

I vote 2 🤔 NOISE BOX 2000 has a cool vibe over it.

Got the car sound damper stuff in place and got the sound down on the SV08 Max 🥳 I think that together with the cool plate it will be almost OK to work beside it. 🙂

I just did a reflection that the limits cause me jumping into this kind of thinking. I just setup a free/cheap model (very daly token limited) for my private projects and directly started to plan how to use each "token slot" and stressing about it. But never did at work where plans are big enough.

Well done, was it expensive also? I have wonded if it would makes sense to use them (or other ) for the more strange fumey materials if I need. I have only dared to use PLA/PETG for now. Looking at your experience it seems I should get some better filtrering and do it at home anyway 🤔

Nice work, I have not dared trying TPU on my printer yet, just got a roll of it and never used it. Maybe time to give it a try now with my last projekt finished 🤔
I spotted some feed it directly to the print head, and som via the tube on the SV08 Max.

Sovol SV08 Max 150mm ZZ Tophat System by Zingo Andersen | Download free STL model | Printables.com

Took a break from my camperwagon project and desiged "ZZ Tophat" for my Sovol SV08 Max
It rurned out great with a embedded screen, Wham Bam the Cloud holder and air filtration via IKEA förnuftig. It also alows to halfopen the glass top 🥳

www.printables.com/model/154714...

Starting with CAD recently I like how the whole chain of edits is preserved and recalculated, and at the same time a bit annoying when you fix small stuff in the beginning or move things around. After you feel you where ready with it 😆

Congratulations, that feels so good and is a nice releaf, and sometimes scary depending on the project 🙂

This is the way.

Since I swiched to Eddy NG (with tap) Its also my minimum standard 🙂

There is so much gret work produced bye each team members in our team so I dont have words to describe it, I'm just flabbergasted about how good and fun this is. Thanks everyone 🙏

Thanks, it's a big honor being able to be part of the Arm team, this is just a smal piece of all the great work the whole team is contributing to ExecuTorch, working with this team and the tight collaboration with Meta and the community is one of the most exciting thing I have done in my life.

Thanks, it's a big honor being able to be part of the Arm team, this is just a smal piece of all the great work the whole team is contributing to ExecuTorch, working with this team and the tight collaboration with Meta and the community is one of the most exciting thing I have done in my life.

Wow what a conference PyTorch conf was this year, we didn't expect much in the embedded space, but we talked with a lot interesting people. And I got a small community award for our work on ExecuTorch. 🙏

It's so nice to see the stuff we have worked with in our team is being part of getting Executourch to 1.0 status.

pytorch.org/blog/introdu...

Seem like I'm going to the PyTorch Conference in less the two weeks, this will be fun!

A Sovol SV08 Max 3D printer with a good first layer covering the whole print area.

Wow, setting up the Sovol SV08 Max and got a perfect 495x495 first layer test out of the box, no first layer calibration done (no paper involved 😆), the Eddy sensor with tap just solved it.
I expected some problems on this large printer. Time to testprint something high now.

If we start calling them dartridges so we can keep the acronym, I don't see a big problem.

Wow, Thanks for all the work

I probably need to try and more with assemblies, I currenelty just add more and more parts to the same "sheet" :) It's getting more and more "hevy" to work with.

I wonder if the ML-model would work on somerhing Ethos-U55 based with 2Mb mem then it could even run on the Himax boards out there.

Yeah I got one out full size and for the other halv I reCADed it so I could print it in two halves 😊

A lot of failed 3d prints of the same two parts, failing at different heights between 10mm and 420mm.

A 3d print with a lot of stuff that has fallen during the print and other stiff getting wobbly and ugly due to the missing parts.

After months of different 3d print fails at different heights I have ordered a Savol SV08 Max to continue the work, I think a bed slinger is probably a bad fit for high wobbly stuff and I hope a Core-XY will help. The extra 80mm och the print bed will also help in the design. 🤔

A 3d printer lower front of a Citroen HY minivan that can be opened. The print is not finished only the lower half is done.

After many months with failed prints I finally managed to print the first lower parts of my Camperwagon 3.1, a Citroen HY lookalike, by luck (and some hard work 😂) it turned out as I imagined. 🥳

This will save so much time, a perfect present for young people moving for the first time.

Thanks for this lists 🙏

Exactly this soup on youtube dot com is also one of my top 3, I have not put my top 3 soups in rate order yet but if I did it would definitely be one of my top two.

I have also seen those math rumors going around. I have been programming since around 1986 and have almost only used add, sub, mul and div. Maybe an occasional mod/rest, and some bit ops like and, or and not. Thats it!

Got a nice package in the post, hope I get some time to play with it soon 😊