Zetta 🔜 MFF

These things are not exclusive.

Rather, they are inclusive of who I am.

Multiple things can be true at the same time.

If perception dictates reality, then we are all in a quantum state of multiple possible labels at any one time until we take measure of ourselves or are measured by others.
3/3

12.11.2025 06:24 — 👍 0    🔁 0    💬 1    📌 0

I'm working on myself.

We can't change what's done, but we can change what we do next.

I can only try to be a better version of myself every day.

I'm not hiding myself anymore.

I'm furry, and kinkster, and pup; but also an engineer and professional.
2/3

12.11.2025 06:24 — 👍 0    🔁 0    💬 1    📌 0

Ok, so real talk...
I've been doing a fuck ton of suppressing myself these last 6-ish years
These past few months I've been getting back to myself.
TL;DR: trauma, grief, suppression of self.

COVID isolation didn't help things, but by that point I had already isolated myself anyway.
1/3

12.11.2025 06:24 — 👍 1    🔁 0    💬 1    📌 0

This puts the LED draw at roughly 1mA per LED.
Realistically, this could push 4900 LEDs.

Not for very long on an 18650, but the capacity is there.

12.11.2025 05:56 — 👍 0    🔁 0    💬 0    📌 0

Got a battery for the multimeter.
Power testing puts my 600+ LED and 6+ hour runtime estimates in the ballpark of EXTREMELY conservative.

TL;DR: there's enough juice to rave all night.
Also run+charge via power bank or swap 18650 batteries.
Either way, the power ceiling is HIGH.

<3
-Z

11.11.2025 01:33 — 👍 4    🔁 3    💬 1    📌 0

Open Source! Soft-Launch | BarkItUp Get more from BarkItUp on Patreon

Open Source?
Yes!

Testing has succeeded and I think it's in a working state.

Engineered PCB design files, firmware, and current 2.0 Arduino code.

www.patreon.com/posts/141779...
Yay!

<3
-Z

22.10.2025 11:11 — 👍 2    🔁 1    💬 0    📌 0

🦊 ZettaLights - Custom LED Harnesses

What makes us different:
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB

$500-650+ | Standard or full custom builds
Pre-orders: barkitup.dog

25.10.2025 18:40 — 👍 2    🔁 2    💬 1    📌 0

Field testing!
Gear night at a local venue.
A lot of fun! Pups, fuzzies, and everything in between!
We got in a bit early to get some action shots before it got bumping.

27.10.2025 20:29 — 👍 5    🔁 3    💬 1    📌 0

Harness electronics build layout with wiring and extras

All the pieces are in place, time to start building!

This one will have plastic buckles and stainless steel hardware due to a nickel sensitivity of the wearer.

Testing layouts and some application of heat shrink for a little extra protection!

10.10.2025 14:51 — 👍 3    🔁 2    💬 1    📌 0

Bark It Up! business card front and back (harnesses, collars, art, fursuits, accessories)

Oh yeah!
We got a business card!

Testing the hardware at a few local venues in the coming weeks.
Pre-order soft launch to follow!

<3
-Z

16.10.2025 14:25 — 👍 6    🔁 2    💬 0    📌 0

Box! Button! USB!

Custom PCB based on a few Adafruit dev boards with some components beefed up for higher amperage, more LED potential, and use of 18650 battery.

Can be run and/or charged via onboard USB-C.
1 amp limited charge rate.
Main switching diodes rated for 5A.

18.09.2025 04:34 — 👍 4    🔁 1    💬 1    📌 0

Version 2.0 !! Code Demo:

Restructured and updated for new controller hardware.
(Custom designed, TBA)

New FFT (Fast Fourier Transform) logic, better frequency response, faster processing power, added colors to account for more frequency response zones.

(16 frequency ranges mapped to 8 colors)

29.08.2025 04:48 — 👍 5    🔁 1    💬 2    📌 0

Front and back. Test print circuit boards for custom controller design.

Circuit board with test print enclosures for layout and hole spacing. (Power switch slot, USB-C slot, button mount hole, LED wire hole on side)

Circuit board back with quarter for scale. (Sorry, no banana on hand)

Bonus! As a treat!
First print test PCBs!

(Redesign soon, slight changes to layout and size)

29.08.2025 05:48 — 👍 2    🔁 1    💬 0    📌 0

Spirit Halloween 'Furry' masks and accessories.

Zetta refreshed reference art.

Zetta refresh new suit head using UV reactive fur.

I've apparently been duplicated and mass produced after refreshing to match UV reactive fur color '>_>
Guess that's what I get for being basic.
Found on Reddit: www.reddit.com/r/FursuitMak...

19.08.2025 21:31 — 👍 1    🔁 0    💬 1    📌 0

Making a move!
We've got a new domain for consolidated projects.
@barkitup.dog

Follow there for future updates plus additional art and fuzzy projects!

14.08.2025 23:03 — 👍 1    🔁 1    💬 0    📌 0

Hard at work on coding this week.
Finally at a revision I am happy with! (For now? 🙂)

FFT mode (random LED lit, color determined by frequency of audio)
FFT mode 2 (Audio spectrum visualizer, LED color/location static)
Solid mode fades through the color spectrum
Rainbow mode
Streak mode

10.05.2025 23:07 — 👍 3    🔁 3    💬 1    📌 1

11.12.2024 14:20 — 👍 224    🔁 130    💬 1    📌 6