makingathome

I’m trying out the SawStop Revolution miter gauge. I thought I would try cutting the pieces for a pentagon.

So 360 degrees over 5 miters divided by 2 = 36 degrees.

I changed the miter gauge adjustment to 1 degree increments and then rotated it to 36 degrees and made my cuts.

Here are a couple more options for using the Low Profile Clamps from Bow Products on your CNC or work table. You can use a screw adapter to screw the low profile clamp directly to the workbench or CNC waste board.

#bowproducts ⁠#CNC #clamps #woodworking #wasteboard

Today I made a tumbler for a friend with a full wrap engraving. This is a “prism” style tumbler.

If you use my code “MAKINGATHOME” to purchase a laser through OneLaser, you will SAVE 3%.
www.1laser.com/makingathome

#lensdigital #onelaser #laser #rotary #engraving

I’m using the High Country Tools 3/8” flush trim bit to cut out some charcuterie boards with my Sawstop router table. I cut out the 1/4” thick acrylic templates on my laser. This bit is a 3/8” diameter, but has a 1/2” shank.

#sawstopsaws #highcountrytools #router #bits #routerbits

I used Carveco CNC software with my Onefinity CNC to carve out the Onefinity Logo and the Redline CNC logo.

Get your OneFinity CNChere:
www.onefinitycnc.com?ref=makingat...

#askcarveco #onefinitycnc #redlinecnc #cnc #bits

The next wood I am running through the Oliver 8" helical head jointer is a piece of 4/4 white oak. The board had a fairly straight edge, but that edge was extremely rough. After a couple passes I had a perfect 90 degree edge.

#olivermachinery #jointer #woodworking #tools #woodworker

I cleaned out a drawer in my tool chest for the great tools I just received from Swan Tool Group.

I really like the size and weight of the Firehawk square. The depth stop is going to be really handy for setting router bits and saw blade depths.

swantoolgroup.com

#swantoolgroup #gifted #tools

Time to flatten another board. Tonight it's a nice piece of walnut. I use the xbox controller to run the Ripper flattening bit over the wood until I have hit all of the surface. Then I flip it over and do the same to the other side and get it to the thickness I want.

#onefinitycnc #highcountrytools

I had an opportunity to stop by the Harvey Woodworking headquarters recently. It was amazing to see the setup and the showroom with some of their amazing tools. I definitely could use one of the dust processors in the shop next.

#harveywoodworking #bandsaw #lathe #tools #saw #woodworking

I just added the new Kreg 20V Ionic Drive™ 1/4" Trim Router kit to my shop and I am putting it to use today rounding over some edges on these pieces of wood. It uses the new Kreg 20V Blue Ion batteries so you don't have to worry about cords getting in the way.

#kregjig #sponsored #kreg #kregtools

The next test for the Oliver 8" helical head jointer was running the face of a piece of poplar through it. A couple passes and the face of this board liked and felt like is was already sanded. You can see in the video there were no blade marks..

#olivermachinery #jointer #woodworking #tools

Time for the first piece of wood through the Oliver 8" helical head jointer. The first victim is a piece of poplar. I had already adjusted the fence to 90°. After just a couple passes, it was perfectly 90. I think I'm in love!

#olivermachinery #jointer #woodworking #tools #woodworker

I have another Millennium Falcon catch-all tray I made from cherry on my Onefinity CNC that needs some finish. I’m using Bee’Nooba wax from Bumblechutes for many reasons, but I like how it makes the wood look.

#bumblechutes #onefinitycnc #cnc #finish #woodfinish

I'm rounding over the edges on this cherry Millennium Falcon catch all tray using a 1/4" roundover bit on the SawStop router table.

I will be posting this on my web site if anyone is interested. Would make great gifts for the Star Wars fan in your life.

#starwars #sawstop #surfprepsanding

The last thing to do on this Oliver Machinery 8" helical jointer is to add a 4" Lightning Lock dust collection fitting. These make it super easy to switch dust collection between machines.

Save on your order by using my affiliate link.

#olivermachinery #carbonmethod #jointer

I just got the WeCreat Vision Pro 45 watt laser. The setup is straightforward and there is even a WeCreat video that guides you through the process. This laser is also auto lifting and auto focus for ease of use.

Find out more here:
wecreattechltd.pxf.io/Z69WVK

#wecreat #gifted

Today I'm trying out the Litheli FrozenPack. It's a battery powered backpack fridge and a car fridge all in one. My first road trip with this cooler was two and a half hours each way.

Here is an Amazon affiliate link:
amzn.to/4iA9dfw

#litheli #gifted #cooler #fridge #carfridge

I just put together this laser cut antique lantern wood model from WoodTrick. They sent me this one to try. After putting this together I have to say that the precise laser cuts of the pieces are really amazing.

woodtrick.com/collections/...
Discount code: makingat10

#woodtrick #model #lasercut

HOTO Tools sent me one of their new PixelDrive screwdrivers to try out. It has a great design, just like all of the other HOTO tools that I have.

The screwdriver and 30 different bits store in one compact cylinder.

#HOTO #gifted #PixelDrive #HOTOScrewdriver #digitalaesthetic

Check out this laser cut lantern wood model from WoodTrick. They sent me one to try out so I am going to put this together.

Black Friday savings - Use my discount code to save when you order:

woodtrick.com/collections/...
Discount code: makingat10

#woodtrick #model #lasercut #building #puzzle

Here is the next scanning video for the Einstar 2 3D scanner. This scanner can run wirelessly or wired to your computer. I am scanning this little Einstar mascot figure.

Black Friday specials - save up to 20%.
www.einstar.com

#einstar3d #3DScanning #scanner #modeling #3DScanner #Shining3D

I’m cutting out this millennium falcon catch all tray made out of cherry on the Harvey Ambassador C14 bandsaw. I love this awesome machine for doing things like this as well as resawing larger pieces of wood. Next, I’ll move onto the router table.

#harveywoodworking #OneFinitycnc #Redlinecnc

I carved this Millennium Falcon catch-all tray out of spalted maple on my Onefinity CNC and now that it has been all sanded and cleaned up it is time to add finish. I am using Bee'Nooba wax from Bumblechutes.

#bumblechutes #finish #woodfinish #charcuterie #cuttingboard

I got the Oliver Machinery 4235.230 8” jointer and needed a mobile base. This jointer is pretty long, which is great for the 72” long bed, but doesn’t allow for a lot of swivel mobile base options.

Check out Rockler now:
rocklercompaniesinc.pxf.io/7a2K9V

#gifted #olivermachinery #rockler #boratool

The Giraffe Tools Black Friday sale is underway from November 18th to the 28th

Save up to 30%, with pressure washers priced from just $279.99
Save up to 30%, with vacuum cleaners priced from just $292.49

Use code MAKINGAH2 to save an additional 5% off

#giraffetools #sponsored #reel #vacuum

Time to add Carbon Method protective coating to my Oliver Machinery jointer. This will keep the cast-iron surface rust free.

You can save 10% on Carbon Method by using my link in the affiliate section of my bio link!

#olivermachinery #carbonmethod #jointer #tools #protection #woodworking

Xfasten sent me a care package with a lot of their items I use all the time like double-sided CNC tape, painters tape, and gaffers tape, but they also sent me some items I didn't know they carried, like detail sanders, and a brand new product called CLYND.

#getclynd #xfastenbrand #gifted

Just some shop sounds of peeling the plastic off of the cast-iron parts on this new Oliver 4235.230 8" jointer. I’m going to get this wiped down and then get it coated with some Carbon Method to keep the cast iron from resting and to keep it nice.

#olivermachinery #jointer #woodworking #tools

Trying out the Microclimate Air 3 Kit for the first time. This whole head helmet is pretty amazing when you try it out. The fresh air in the helmet is just the right amount of flow to be pleasant to wear. Microclimateair sent me this to try out.

#microclimateair #gifted #respirator #filter

Today I am using the Kreg 20V Ionic Drive™ 6 1/2" Plunge-Cut Track Saw Kit for the first time. This is part of the new cordless series of tools that Kreg just came out with. This is a great system for cutting things away from a standard power outlet.

#kregjig #sponsored #Kreg #kregtools #saw